Mitsubishi VS-45VA2 Owner's Manual page 35

Projection TV + separate UHF and VHF antennas
equipment you will need
If UI-]:F and VHF signals are brought into your home with two
separate antennas, you'll need to combine the antennas into a single
wire to connect them to the Projection _IuJ. To do this you will need a
UHF/VI-]:F combiner. (There are different combiners for different
kinds of leads. Check with :your local electronics store fbr the kind of
combiner you need.)
Pictured below is a standard combiner.
UHF
® ®
.!1
To connect separate UHF and VI-IF antem_as to your Projection TV.
O Connect the antenna leads to the UHFiVI-IF combiner.
Press the combiner onto the ANT-A terminal on the P_ojection TV.
VHF ANTENNA
(CHANNELS 2-13)
I
1
-_ FLATTWIN LEAD
EXTERNAL
ANTENNA
OR CABLE
4
UHF ANTENNA
(CHANNELS !4-69)
--FLAT
TWIN LEAD
300 Ohm to 75 Ohm
Combiner
(_ACK_ ISI_E]
._ANT _
(VHF/UHF)
B
O
ProjeclionTV
Rear Terminals
Basic Connections 33