Mitsubishi VS-45VA2 Owner's Manual page 32

Projection TV + antenna or cable without a
decoder box
equipment you will need
If you have a standard 75-ohm coaxial cable, you x_l: _. n ot need ad,ii-
tional equipment. If your antenna has two leads (called flat twLu
leads), you'll need:
• 1 75-300 ohm transformer.
A
=-- 75 Ohm
Coaxial Cable
300 Ohm Flat
Twin Lead
Optional 300 Ohm to 75 Ohm
Matching Transformer
ANT _
5_'_PJH_
A
0
B
Projection TV Rear Terminals
connecting a cable
O Push or screw the end of the cable onto the ANT-A '_erminal on the
Projection TV.
30
connecting an antenna with fiat twin leads
O Use a screwdriver to connect the leads to the tra_;former.
Push or screw the transformer onto the ANT-A terminal on the
Projection TV.
Chapter 2: Connecting Your Projection TV