Table of Contents
Advertisement
Adjusting
the color alignment
Your Mitsubishi
Projection
TV has three picture tubes and large diameter
lenses which are arranged
in-line to project the light beams. Each picture
tube projects
only one color: red, green or blue. For the best color pic-
ture, the three colors should be converged
at the center of screen.
Here
is the procedure
for converging
the color beams:
•
First Time Set-Up
Set the clock
Memorize
channels
Add/delete
channels
Use Home Theater:. off
Rename the inputs
Color alignment
Use ADJUST to select.
Then
press ENTER.
Press MENU to return to
TV Main Menu.
Adjust color alignment
Press VIDEO to select
Red or Blue. Then on
each screen press
ADJUST
until the
crosshairs
appear
white.
Press MENU to return to
First Time Set-Up
Menu.
Red
with
remote
controh
0
Press the MENU button. The TV °
menu will appear on the screen.
O
Select "First
Time Set-Up"as-
ing the ADJUST
button.
Then
press the ENTER
button.
•
Select "Color
alignment"
using
the ADJUST
button. Then press
the ENTER
bu_ton.
O
O
The "Color
alignment"
screen
,will appear.
Select Red or Blue using VIDEO
button, then coverge the red and
blue lines onto the green until the
,green line will turn white.
with control
buttons
on the front
panel:
O
Press the test button.
0
Following
the
additional
on-
:screen instructions,
adjust
the
color alignment.
_> Important:
_> Important:
The cross-bar pattern is intended for use only as a converge aid. It should
not be left on for a long period of time,
since damage
to the picture
tubes could occur.
Convergence
of the light beams can be affected by external factors over
time and convergence
readjustment
may become necessary.
Ifa cha:age
in the color quality of the picture becomes
noticable,
check the con-
vergence
adjustment
with the test pattern
and readjust
as required.
62
Chapter 3: Operating Your Projection TV
Advertisement
Table of Contents
