Using Auto Set - KitchenAid KEDH207WHO Use And Care Manual

Using and Caring for Your Oven
Using auto set
Auto Set lets you choose from among ten
preset oven cooking cycles. These cycles
store commonly used cooking times,
cooking temperatures and probe tempera-
ture settings. Auto Set saves you time by
limiting the number of pads you have to
press when cooking at a favorite setting.
1. Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 5-8), insert probe
into food. (Follow Steps 1-4 in "Using
the temperature probe" on page 23.)
2. Set Auto Set cycle.
PRESS
YOU SEE
Press desired Number pad.
Example:
PRESS
Example:
YOU SEE
(Use the "Auto set chad" on page 26 as
your guide for selecting the correct cycle.)
NOTES:
• You can change the Auto Set
cycle any time before pressing the
Start/Enter pad by repeating Step 2.
• The cooking setting, time, or probe tem-
perature will be displayed before you press
the Stad/Enter pad.
3. Start oven.
PRESS
Example
For Auto
Set 5:
YOU SEE
NOTE: Cycles 1-4, 9, O: To see the time when
the Auto Set cycle will end, press the Stop
Time pad. Cycles 5-8: To see the intemal food
temperature selected, press the Temp Probe
pad.
When the Auto Set cycle is done, "End"
and the time of day will show in the display.
Four tones will sound, followed by one short
tone every minute, until you open the door,
remove the probe, or press the Cancel/Off
pad.
Example:
YOU SEE
25