Using Auto Set - KitchenAid KERH507 Use And Care Manual

Using auto set

Auto Set lets you choose from among ten
preset oven cooking cycles. These cycles
store commonly used cooking times,
cooking temperatures, and probe tempera-
ture settings. Auto Set saves you time by
limiting the number of pads you have to
press when cooking at a favorite setting.
1. Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 5-8), insert probe
into food. (Follow Steps 1-4 in "Using
the temperature probe" on page 24.)
2. Set Auto Set cycle.
Press desired Number pad.
(Use the "Auto set chart" on page 28
as your guide for selecting the correct
cycle.)
NOTES:
• You can change the Auto Set cycle
any time before pressing the Start/
Enter pad by repeating Step 2.
3. Start oven.
PRESS
NOTE: Cycles 1-4, 9, 0: To see the time
when the Auto Set cycle will end, press
the Stop Time pad.
When the Auto Set cycle is done,
"End" and the time of day will show in the
display. Four tones will sound, followed
by one short tone every minute, until you
open the door, remove the probe, or
press the Cancel/Off pad.
U
PRESS
AUTO
SET
Example:
PRESS
1
START
ENTER
sing and Caring for Your Oven
YOU SEE
Example:
YOU SEE
• The cooking setting, time, or probe
temperature will be displayed before you
press the Start/Enter pad.
Example
For Auto
Set 5:
YOU SEE
Example:
YOU SEE
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
DELAY TIMED
ON
CLEAN LOCKED
HR
DEHYD ROTIS
START? CLEAN
DELAY TIMED ON
CLEAN LOCKED
HR
DEHYD ROTIS
START?
CLEAN
MIN MIN SEC
START STOP TIMER
MIN MIN SEC
START STOP TIMER
MIN MIN SEC
START STOP TIMER
MIN MIN SEC
START STOP TIMER
27