Zigzag Stitch With Right Needle Position; Tapering - Pfaff 2144 Instruction Manual

4. Operate the multi-color touch screen

Zigzag stitch with right needle position

Touch "Overcast".
Touch the zigzag stitch No 22. This zigzag stitch is sewn
along the right edge of the presser foot.
The settings that can be altered for stitch No. 22 are the
same as for stitch No. 3 and No 10.

Tapering

With stitch No. 22, the right-hand position of the needle
remains constant; the left-hand position changes.
The width of the zigzag stitch starts at 0 mm and
becomes wider until the previously selected stitch width is
reached. If you press the reverse key, the width is automati-
cally reduced to 0 mm
The width of the zigzag stitch tapers to 0 mm and
stops. For mitered corners, pivot your fabric and continue
stitching. The stitch will automatically become wider as you
sew.
The stitch width is reduced to 0 mm at an angle of 30°.
The stitch width is reduced to 0 mm at an angle of 45°.
The stitch width is reduced to 0 mm at an angle of 60°.
Use the icon to reverse the needle position. The cor-
ner is turned in the other direction.
Save your change by touching
closed.
Touch , the window is closed without any changes
being saved.
Touch to return to the main menu.
For an unsymmetrical stitch layout at 90°, 45° and 30°
angles, tapering is available for the following stitch pat-
terns.
• 31, 44, 45, 131, 132, 134, 144, 170.
Unlike the no. 3 and 10 zigzag stitches, the stitches are not
automatically adjusted to 0.35 mm stitch length and 7 mm
stitch width.
4-3
, the window is then