Checking The Length And Width Data Of The Stitch Points - Pfaff Creative 7530 Instruction Manual

18
Checking the length and width data of the
stitch points
If the final sewn pattern does not correspond to
the pattern drawn on the grid, one or more stitch
points have been entered incorrectly. In order to
find the incorrectly entered stitch points, you
must be in the programming screen, i.e. "edit"
must be in the top right hand corner of the
display. Press numbered key 9.The stitch number
of the last stitch point of your pattern appears.
The length and width data of this stitch can now
be compared with that of the sketch. Press num
bered key 9 again.The next stitch appears and
can be checked in the same way. This process
can be repeated for all of the stitch points.
After stitch 1, .1 appears with the same length and
width data with one point. It is useful, when look
ing for mistakes, to number the individual points
in the sewing path from the first stitch to the last
on the programming sheet, If a mistake is found,
it can be marked on the programming sheet and
corrected as described on the following pages.
It is possible to find out the stitch number of a
particular stitch point using the key"memory" (10).
Position the magnifier (6) on the stitch, press
"memory" and the stitch number appears in the
display.
If two dashes appear"——' there is no stitch
entered in this position.
L
.00 04 06 12 16 20 24 26 32 36 40 44 48 52 56 60 64 68
• .__L LL
—
52
48
44
40
36
32
28
24
20
16
08
04
Boo
/\
/
_
L
L
L
L
L
L
L
L
1
L
L.
F
82