Pfaff Creative 7530 Instruction Manual page 182

1. Seam is sewn unevenly
ihe tension needs adjusting.
Thread is too thick, slubbed or hard.
The bobbin thread is unevenly wound.
Thread loops above or below stitches.
5. The machine does not feed or feeds
irregularly
3ewing lint has collected between the feed dog
eeth rows.
:eed dog is lowered. Slide B (see page 31)
s at right.
3. Machine binds
oose threads in the hook race:
Check needle-thread and bobbin-thread tensions.
Use only quality threads.
Do not wind free-hand. Run the thread through
the primary tension.
Thread up correctly. Check needle-thread and
bobbin-thread tensions.
Remove needle plate, remove lint with brush.
Push slide B (see page 31) to the left.
Remove loose thread and apply one drop of oil
to the hook.
7 Machine does not sew the entered program
witch off the machine and back on again after about 10 seconds. Enter desired program again.
mportant notes:
3efore changing the sewing feet or needles, you must switch off the on/off switch.
)o not start the threaded machine without fabric in it,
f you leave the machine, even for a short time, do not forget to switch off the on/off switch.
This is especially important when children are nearby.
E
0,2
175
COrn