Pfaff Creative 7530 Instruction Manual page 160

Place the eyelet plate onto the needle plate
making sure that pin A fits into the middle cut
out of the needle plate. Then push the eyelet
plate down at the front.
• Place the marked fabric in an embroidery
hoop.
• Cut one or two
fabric threads and push the
fabric over the pin
in
the eyelet plate.
The fabric must fit tightly around the pin.
• Place the presser foot lifter in darning position.
• Pull up the bobbin thread and hold it tor the
first few stitches.
• Stitch around the cut with your chosen pro
gram. While doing so, turn the hoop slowly.
The stitches must be very close to each other.
• Then secure with a few straight stitches.
2
E
G)
4
go
ll
And here is how it is done:
Remove the sewing foot.
Tip: Select another program such as 150, 43 or
63. In this way the cut in the fabric will not be
stitched around or only partly stitched around.
To complete this, select program 32 and stitch
around the cut uniformly. Thus you create beau
tiful petal forms.
153