Removal
• Raise the sewing foot and remove the detach
able work support.
• Pull the needle plate upwards at the back and
remove it.
Replacement
• Lay the back of the needle plate down flat and
push it down at the front until you hear it snap
into place.
Before you start sewing, check that the needle
plate is lying flat.
Cleaning and lubricating
Switch off the on/off switch
• Remove the needle plate and lower the feed
dog.
• Clean the feed dog and hook area with the
brush.
• Apply one drop of oil to the hook as shown
above. The machine is otherwise maintenance
free and must not be oiled in other places.
• Clean and oil the sewing machine every 10 to
15 hours of operation.
Cleaning the display
To clean the display, use a dry, soft, lint-free cloth.
Do not use chemical cleaners or solvents!
L
I
r
I
r
I
I
I
a
Changing the needle plate
Switch off the on/off switch
1 72