Frame-By-Frame Playback; Adjusting Volume; Viewing Images On A Television Or Another Monitor; Checking The Date And Time Of Shooting - Panasonic AVCCAM AG-AC160P Operating Instructions Manual

Frame-by-frame playback

1
Tilt the OPERATION lever in the < >
direction during playback to pause the clip
(or press the <PAUSE> button on the remote
control).
2
Press the <AUDIO MON/ADV> button (or
press the <STILL ADV> button on the remote
control).
• Hold down to continuously advance frame-by-
frame until the button is released.
• Hold down the <STILL ADV> button on the
remote control to switch to continuous frame
by frame mode. Press the <PAUSE> button to
cancel.
Camera or
When the <+> button is pressed, the images are
advanced in the forward direction frame-by-frame,
and when the <-> button is pressed, they are
advanced in the reverse direction at half-second
intervals (in AVCHD mode) or one frame at a time
(in DV mode).
To return to normal playback, tilt the OPERATION
lever in the < > direction (play) (or press the
<PLAY> button on the remote control).

Adjusting volume

1
The volume of audio output from the built-
in speaker and headphone jack can be
adjusted with the <AUDIO MON/ADV>
buttons during playback.
Press the <ZOOM>/<VOL> buttons if using the
remote control.
66
SEARCH PLAY SEARCH
STILL ADV PAUSE STILL ADV
SKIP STOP SKIP
remote control
Camera or
Viewing images on a television or
another monitor
You can view the images on a television if you
connect the unit to a television or another monitor
set using a video pin cable (optional), audio pin
cable (optional), HDMI cable (optional), or BNC
cable (optional).
1
Connect the camera to a television or
another monitor. (Page 70)
2
Start playback.
• To show the information that appears on the
viewfinder and LCD monitor on a television,
press the <EXT DISPLAY> button on the
remote control.
Press the <EXT DISPLAY> button again to
clear the display.
EXT
DISPLAY
DATE/
TIME
SEARCH
STILL ADV

Checking the date and time of shooting

SKIP
Press the <DATE/TIME> button on the remote
control to show the year, month, date and time of
shooting on the viewfinder and the LCD monitor.
Each time you press the button, the display
changes as follows.
Time
Date
Time and Date
No display
DATE/
ZOOM
TIME
VOL
remote control
START/
PHOTO
STOP
SHOT
ZOOM
VOL
PLAY SEARCH
PAUSE
STILL ADV
STOP SKIP
MENU
ENTER
START/
PHOTO
EXT
STOP
DISPLAY SHOT
DATE/
ZOOM
TIME
VOL
SEARCH PLAY SEARCH
PAUSE
STILL ADV STILL ADV
SKIP STOP SKIP