Frame-By-Frame Playback; Adjust Volume; Viewing Images On A Television; Checking The Date And Time - Panasonic AVCCAM AG-AF101A Operating Instructions Manual

Memory card camera-recorder
Table of Contents

Advertisement

Useful playback functions (continued)

Frame-by-frame playback

1
Tilt the Operation lever in the
during playback to pause the clip (or press
the PAUSE button on the remote control).
2
Press the AUDIO MON/ADV buttons (or
press the STILL ADV buttons on the remote
control).
• Hold down to continuously advance frame by
frame until the button is released.
• Hold down the STILL ADV button on the
remote control to continuously advance
frame by frame. Press the PAUSE button to
cancel.
MENU
START/
PUSH-ENTER
STOP 2
AUDIO MON/ADV
Camera
When the + button is pressed, the images are
advanced in the forward direction, and when
the - button is pressed, they are advanced in the
reverse direction at half-second intervals.
To return to normal playback, tilt the Operation
lever in the
direction (play) (or press the PLAY
button on the remote control).

Adjust volume

1
The volume of audio output from the
internal speaker and headphone jack can be
adjusted with the AUDIO MON/ADV buttons
during playback.
Press the ZOOM/VOL buttons if using the
remote control.
MENU
PUSH-ENTER
AUDIO MON/ADV
Camera
40
direction
PHOTO
EXT
DISPLAY
SHOT
DATE/
TIME
EXEC
SEARCH
PLAY
PAUSE
STILL ADV
+
SKIP
STOP
ENTER
or
Remote control
EXEC
PHOTO
EXT
SHOT
DISPLAY
DATE/
TIME
+
SEARCH
PLAY
STILL ADV
PAUSE
or
Remote control
SKIP
STOP
ENTER

Viewing images on a television

You can view the images on a television if you
connect the unit to a television set using an AV
cable (not included) or HDMI cable (not included).
1
Connect the camera-recorder to the TV set.
(Page 42)
2
Start playback.
• To show the information that appears on the
viewfinder and LCD on a television, press
START/
STOP
the EXT. DISPLAY button on the remote
control.
ZOOM
Press the EXT. DISPLAY button again to
clear the display.
VOL
SEARCH
STILL ADV
SKIP
MENU

Checking the date and time

Press the DATE/TIME button on the remote
control to show the date and time of shooting on
the viewfinder and the LCD monitor. The display
changes as follows each time you press the button.
Time and Date
START/
STOP
ZOOM
VOL
SEARCH
STILL ADV
SKIP
MENU
START/
PHOTO
EXT
STOP
SHOT
DISPLAY
DATE/
ZOOM
TIME
VOL
SEARCH
PLAY
SEARCH
STILL ADV
PAUSE
STILL ADV
SKIP
STOP
MENU
ENTER
Time
Date
No display
SKIP
START/
PHOTO
EXT
STOP
SHOT
DISPLAY
DATE/
ZOOM
TIME
VOL
SEARCH
PLAY
SEARCH
STILL ADV
PAUSE
STILL ADV
SKIP
STOP
SKIP
MENU
ENTER

Advertisement

Table of Contents
loading

Table of Contents