Tally lamp
The tally lamp lights during recording by setting the
[TALLY LAMP] item of the [OTHER FUNCTIONS]
screen (Page 98) to any setting other than [OFF].
The tally lamp will flash when the camera is in any
of the following circumstances.
• When a recording error has occurred (flashes 4
times per second)
• When the battery has run out (flashes 4 times per
second)
• When available memory card capacity is low
(flashes 4 times per second)
• When battery level is low
(flashes once per second)
• When remaining memory of the memory card is
low (flashes once per second)
Tally lamp
9