Changing Backlight Brightness; Flipping Images Up, Down, Left And Right - Panasonic AVCCAM AG-AC160P Operating Instructions Manual

Changing backlight brightness

The brightness of the LCD monitor backlight can
be adjusted between five different settings.
1
Select [LCD BL] in the [LCD] item on the
setup menu [SW MODE] screen.
[LCD BL] is assigned to the <LCD> button.
2
Press the <LCD> button.
Each time the button is pressed, the backlight
brightness changes in the following order:
0 (normal)-1 (somewhat dark)-2-3
(dark)+1 (bright)0 (normal).
• The setting will be saved even if the power is
switched off.
• It can also be switched with the [LCD
BACKLIGHT] item on the setup menu
[DISPLAY SETUP] screen. (Page 95)
8

Flipping images up, down, left and right

By flipping the images displayed on the LCD
monitor up, down, left and right, the angle of view
and imagery of images can be checked.
Even when the displayed image is flipped, the
recorded image is not flipped.
1
Select [LCD REV] in the [LCD] item on the
setup menu [SW MODE] screen.
[LCD REV] is assigned to the <LCD> button.
2
Press the <LCD> button.
Pressing the button switches between normal
display and flipped display.
• If the power of the camera is switched off, it will
appear in normal display when next switched
on.
• Screen displays other than images are also
flipped. When screen display is not needed,
press the <DISP/MODE CHK> button to turn
off some displays.
• During flipped display, images in REC CHECK
and playback images in <PB> mode are also
flipped.
• Images on the viewfinder are not flipped.