Advertisement
Remarks:
(+) Guard - Guard is a portion of portable luminaries unit
that prevents inadvertent contact with the bulb. It may be
integral with the UV filter or lamp containment barrier or
as part of enclosure or shade.
(+) Lamp containment barrier-lamp containment barrier
is a portion of a portable luminaries unit that encloses the
bulb.
(+) UV filter- UV filter is a portion of a portable
luminaries unit hat limits ultraviolet (UV) emissions.
.
Make sure the light's power switch on the control
panel is in the "OFF" position and power plug is
disconnected from outlet.
.
Use a screwdriver to loosen the screw which is
securing the burner box rear panel.
Buring this process, hold the Lamp class;
otherwise, it will fall and break, potentially
causing bodily harm.
Lamp class
/_
-"-- Screw Here
3.
Remove the Lamp class.
Lamp class
4.
Pull out the light bulb and replace with a new bulb.
.
Bulb
®
/
Reverse the instruction from "steps" 3-1for
installation.
1. To protect against electric shock, do not immerse
cord or plugs in water or other liquid;
2. Unplug from the outlet when not in use and before
cleaning. Allow to cool before putting on or taking
off parts;
3. Do not operate any outdoor cooking gas appliance
with a damaged cord, plug, or after the appliance
malfunctions or has been damaged in any manner.
Contact the manufacturer for repair;
4. Do not let the cord hang over the edge of a table or
touch hot surfaces;
5. Do not use an outdoor cooking gas appliance for
purposes other than intended;
6. When connecting, first connect plug to the outdoor
cooking gas appliance then plug appliance into the
outlet;
7. Use only a Ground Fault Interrupter (GFI) protected
circuit with this outdoor cooking gas appliance;
8. Never remove the grounding plug or usewith an
adapter of 2 prongs;
9. Use only extension cords with a 3 prong grounding
plug, rated for the power of the equipment, and
approved for outdoor usewith a W-A marking.
14
Advertisement
