Advertisement
For your safety the $3218A grill comes equipped with a
UL approved transformerfor outdoor use that provides
low voltage to power 10-watt grill lights featured with this
model.
Light Operation Instruction
1. Make sure light's power switch on the control
panel is in the "OFF" position.
2. Connect power plug to properlygrounded outlet.
3. Turn the light's power switch to "ON".
All wiring is factory connected except the easy
connection you must make: connect the factory wire to
the transformer with a provided screw-on plastic
connector.
Keep any electrical supply cord away from any
heated surface.
Do not turn on the lights when the hood is closed.
Connector
Light Wire
Pull the factory wire through the opening in the rear panel,
plug the transformer in any household outlet.
Bulb Replacement
INSTRUCTIONSPERTAININGTO A RISK OF FIRE,
ELECTRIC SHOCK, EXPOSURETO EXCESSIVE UV
RADIATION,OR INJURYTO PERSONS
IMPORTANTSAFETY INSTRUCTIONS
Lighted lamp is HOT:
WARNING -TO REDUCETHE RISK OF FIRE,
ELECTRIC SHOCK, EXPOSURETO EXCESSIVE UV
RADIATION,OR INJURYTO PERSONS:
1. Turn off/unplug and allow to cool before
replacing bulb (lamp).
2.
Bulb (lamp) gets HOT quickly! Only contact
switch/plug when turning on.
3. Do not touch hot lens, guard, or enclosure. (+)
4.
Do not remain in light if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that may burn.
7. Use only with 10-watt or smaller bulbs (lamps).
8. Do not touch the bulb (lamp) at any time. Use a
soft cloth. Oil from skin may damage bulb (lamp).
9. Do not operate the portable luminaries with a
missing or damaged guard, lamp containment
barrier, or UV filter. (+)
13
Advertisement
