Embroidery - Kenmore 385.17624 Owner's Manual

Hide thumbs Also See for 385.17624:
Table of Contents

Advertisement

Bar Tacking
Stitch width:
2 to 6.5
Stitch length:
0.5 to 1
Needle thread tension:
2 to 6
(_ Presser foot A:
Zigzag foot
This is similar to a very short satin stitch and is used
to reinforce
points
of strain such as corners,
pockets
and straps
of lingerie.
Sew four (4) to six (6) stitches.
_
WIDTH
[_
LENGTH
(_)
®
Embroidery
Stitch width:
1 to 6.5
(_ Stitch length:
Any
Needle thread tension:
2 to 6
(_ Presser foot:
Removed
Feed dogs:
Dropped
Drop the feed dog and remove the foot holder.
Adjust
stitch width as desired.
Draw a design
onto
the fabric
with tailor's
chalk.
Stretch
the fabric
between
embroidery
hoops and place under the
needle.
Lower
the presser
foot lifter to engage
the needle
thread
tension.
Holding
the needle thread
in your
left hand, rotate the handwheel
counterclockwise
for
one complete
turn.
Pull the needle thread
to draw the bobbin
thread
to
the right side of the fabric.
At medium
speed,
stitch
along the marked
outline,
guiding
the fabric carefully
by hand.
After embroidery
is completed,
raise the
feed dogs for normal
sewing.
_
WIDTH
(_)
[_
LENGTH
(_)
®
.(,,=,
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

385.17620

Table of Contents