How The Cycle Works; Setting The Controls - Kenmore 665.75801 Use & Care Manual

Self-leaning gas range
Table of Contents

Advertisement

HOW THE CYCLE WORKS
The Self-Cleaning
cycle uses temperatures
much
hotter than normal oven use to break up and burn
away soil and grease. The clean time is preset at
3_½hours, however you can adjust the time.
Suggested cleaning times are 2½ hours for light
soil and 3V2-4½for average to heavy soil. The door
must be closed completely for it to lock and the
cycle to begin. If properly closed, the door will lock
approximately
6 seconds after START/ENTER is
pressed. The cycle time includes an approximate
30
minute cool down time. To see the time of day during
the cycle, press CLOCK for 5 seconds.
SETTING THE CONTROLS
1.
Press CLEAN.
This will automatically
set a 3_-hour Self-
Cleaning cycle.
PRESS
YOU SEE
2. Set the cleaning time (optional).
PRESS
If you want a Self-Cleaning cycle longer or
,0UR
M_N
shorter than 31/2hours, use the hour and minute
i_1"_
pads to set the cleaning time you want. Press
©%
the (A) or (V) pad(s) until a time between 2_-4_
hours shows on the display.
YOU SEE
(example shows 4½-hour
cleaning time)
3. Press START/ENTER.
PRESS
YOU SEE
START
ENTER
4. After the Self-Cleaning
cycle ends:
YOU SEE
LOCKED goes off and the door unlocks.
5. Press any pad to remove "End" and bring back
time of day; or open door, at which time "door"
will be displayed. Then close door and time of
day will appear in display window.
YOU SEE
(when pressing any pad)
YOU SEE
(when opening the door)
continued on next page
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

665.75808665.75812665.75814

Table of Contents