Cooktop Lockout; Cookware; Electronic Oven Control; Display - Kenmore 665.7527 Series Use & Care Manual

COOKWARE CHARACTERISTICS
Aluminum • Heats quickly and evenly.
Cast iron
Ceramic or
Ceramic glass
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
COOKWARE CHARACTERISTICS
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
Porcelain • See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
ELECTRONIC OVEN CONTROL
C D E F G H /
A
If
.......................... Cookies
Pizza
Timer
Cooktop Ove=_
Lockout _ Lorkaut
@©
A. RECIPE RECALL TM
B. Slow cooker
C. Display
D. Oven lockout indicator icon
E. Cooktop lockout indicator icon
F. Add ! minute
K L M
G. Timer
H. Cooktop lockout
L Oven light/oven lockout
J, Oven selectors
K. Self-clean - LOGICLEAN
TM
L. Temperature setting
N 0 P O R
M. Timed cooking
N. Clock
O. Hour
R Minute
Q. Start
R. Stop/clear
When power is first supplied to the appliance, make sure the
surface burners are in the OFF position. Everything on the display
will light up for 3 seconds, then the time will appear on the
display, flashing on and off.
If the time is flashing on and off at any other time, a power failure
has occurred. To stop the flashing, press any key. To reset the
clock, press CLOCK.
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
The START pad begins any function. If the START pad is not
touched after touching another pad, "START?" will appear in the
display.
The STOP/CLEAR pad stops any oven function except for the
Clock, Timer and Cooktop or Oven lockouts.
After pressing STOP/CLEAR, the display will show the time of
day or, if the minute timer is also being used, the time remaining.