JVC HR-J220U Instructions Manual page 21

"ERROR"WARNING
If the start time you input has already passed (i.e. is prior to the
present date and time), the VCR will flash "ERROR" on the
Program Set screen.
P_O_P, AM
--E.RROR--
DATE/"1 "3¢22WED
START 12:30 AM
STOP - : -- AM
CHANNEL -- SP
PRESS SELECT, SET +/-)
PRESS MENU) TO END
Check if you've inp'ut the correct time and date. Remember: late
night shows beginning at midnight or later must have the next
day's date.
12,13
,8
9,11
TO DISENGAGE THE TIMER 1
/
For safety, when AUTO TIMER is "OFF", your VCR disables all
other functions while in the timer mode.
• To use your VCR, first disengage the timer mode by pressing
TIMER again. Now all functions will be operable.
• To re-engage the timer, press TIMER.
Press SET to set the hour
(making sure that AM or
PM is correct), and then
press SELECT.
Press SET to set the
minutes, and then press
SELECT.
I PROGRAM 1
DATE 12/28THU
START 12:00PM
STOP - : - AM
CHANNEL - SP
PRESS (SELECT SUI" +/--)
PRESS (MENU) T0 ENr_
Set the stop time in the same
way as you set the start time
in steps 7 - 8.
PROGRAM 1
DATE 12/28 THU
START 12:00 PM
STOP 1:00 PM
CHANNEL - SP
PRESS (SELECT. SET ÷/-
(MENU) TO END
0
Press the Digit keys to enter
the channel number, and
then press SELECT.
PROGRAM 1
DATE 1Z/28 THU
START 'i2:00 PM
STOP 1:00 PM
CHANNEL 25 SP
PRESS (SELECT, SET +/-)
(MENU) TO END....___...,
11
Press SET to choose SP or
EP, and then press SELECT.
• To input another program,
repeat steps 3 -- 11. (You
can set up to a maximum
of 8 programs.)
I PROGRAM 1 "_
DATE 12/28 THU |
START 12:00 PM /
STOP 1:00PM /
CHANNEL 25 EP |
!
PRESS SELECT SET÷l-
12 essM U.
• Select the desired Auto Timer setting. See page 22 for
details.
13
MENU again.
14 Press TIeR
• The VCR will enter the timer mode and power will go
off.
For AUTO TIMER and other timer programming features, _:7 p.22.
For other error indications, _ p.27.
NOTES:
• If there is a power failure, the VCR will remember your timer-record
selections for 10 minutes.
• When timer-recording cable channels received through a Converter
Box, be sure to keep the Converter Box set to ON.
21