Getting To Know Your Vcr; On-Screen Menus And Displays - JVC HR-J220U Instructions Manual

Getting To Know Your VCR (cont'd)
• The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new channel is
displayed on the screen for 5 seconds.
Operation mode
When the operation mode is changed, the new mode is displayed -- RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec., when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is engaged), and ITR *:** (5 sec.).
_Tape speed indicator
PAUSE_J
Clock time
"Cassette Loaded" mark
When a cassette is loaded, the
mark is displayed for 5 seconds,
It blinks when the VCR's
EJECT button is pushed.
SUN 12:00 AM
SP"
MEMORY OFF
COUNT -1:23:45"
Counter memory on/off
Counter reading
To recall an indication
[] Press ENTEWOSD.
• ALl indications corresponding to the current
status are displayed for 5 seconds, leaving the
counter information on the screen.
(No indication during still and search).
[] Press ENTER/OSD again to clear the display.
To stop the on-screen indications from being
shown
"MAIN MENU" screen.
[] Press SET to move the cursor to
FUNCTION SET, and then press
SELECT.
When you do not want to show the indications - for example when
you dub a tape to another VCR (using this VCR as the player), set
SUPERIMPOSE to OFF.
[] Press MENU to access the
MAIN MENU
PROGRAM SET
$ FUNCTION SET
TUNER SET
INITIAL SET
PRESS (SELECT, SET +/-)
PRESS (MENU) TO END
[] Press SET to move the cursor to
SUPERIMPOSE, and then press
SELECT.
[] Press SET to Choose OFF.
[] Press MENU as many times as
necessary to exit.
• Setting is completed, and a
normal TV screen is displayed.
FUNCTION
AUTO TIMER
$ SUPERIMPOSE
/
PRESS (SELECT, SET 4-/-) /
PRESS (MENU) TO END
1
SUPERIMPOSE '_
"
)
$ OFF
PRESS (SET +/-) FOR CHOICE/
8