JVC HR-J220U Instructions Manual page 17

POWER
REW PLAY
IWER
;.RESET
rIMER
Counter Reset
To reset the tape counter to zero
[] Press C. RESET.
• Pressing DISPLAY repeatedly changes the VCR's
displayed indication. (Counter reading _ Channel*
Clock time).
*Channel is not displayed during playback.
Counter Memory
To returnto tape position zero
During Playback...
[] Press C. RESET at a point you wish to locate later.
• The counter will read "OH 00M 00S".
[] Press C. MEMORY.
• Counter Memory mark is displayed.
[] When you wish to return to that point, press STOP and
then press REW.
• The tape will rewind and stop at about "OH 00i 00S"
automatically.
4 [] To cancel the Counter Memory mode, press
C. MEMORY.
Next-Function Memory
You can "tell" the VCR what to do immediately after rewinding.
During Stop:
For automatic start of playback after the tape is rewound...
[] Press REW.
[] Press PLAY within 2 seconds.
For automatic power offafter the tape is rewound...
[] Press REW.
[] Press POWER within 2 seconds.
For automatic timer standby after the tape is rewound...
[] Press REW.
[] Press TIMER within 2 seconds.
• If you want the "next function" to automatically start when
the counter reads "OH00M 00S" (instead of at the beginning
of the tape), press C. MEMORY so that the counter
memory "M" mark appears on the VCR display panel
before pressing Rewind or Fast-Forward.
17