Advertisement
CLEANING
CHART
Broiler pan and
insert, Select
models
• Soap and water
• Plastic or soap
filled scouring pad
• Dishwasher
Never cover insert with aluminum foil as this prevents the fat from
draining to pan below.
1. Remove from oven after use. Coot then pour off grease.
2. Place soapy cloth over insert and pan; let soak to loosen soil.
3. Wash in warm soapy water. Use soap filled scouring pad to remove
stubborn soil.
4. Broiler pan and insert can be cleaned in the dishwasher.
Elements,
1. Elements are self-cleaning. Soil will burn off as elements are used.
oven
2. Do not spray oven cteaner on elements, electrical hook up or connection.
Enamel, painted
• Soap and water
NOTE: Use dry towel or cloth to wipe up spills, especially acid (milk, lemon
• Mild liquid cleaner
juice, fruit, mustard, tomato sauce) or sugary spills. Surface may discolor or
• Glass cleaner
dull if soil is not immediately removed. This is especially important for white
surfaces.
Glass
• Oven door
• Oven window
• Soap and water
• Glass cleaner
• Paste of baking
soda and water
• Cooktop cleaner-
conditioner
1. When coot, wash with warm soapy water, rinse and dry. Never wipe a
warm or hot surface with a damp cloth as this may damage the surface
and may cause a steam burn.
2. For stubborn soil, use mildly abrasive cleaning agents such as baking
soda paste or Bon Ami.
3. Do not use abrasive, caustic or harsh cleaning agents such as steel wool
pads or oven cleaners. These products will scratch or permanently
damage the surface.
To prevent staining of the oven window, avoid using excessive
amounts of water which may seep under or behind glass.
1. Wash with soap and water. Remove stubborn soil with paste of baking
soda and water. Rinse with clear water and dry.
2. Do not use abrasive materials such as scouring pads, steel wool or
powdered cleaning agents. They will damage glass.
Metal finishes
• Soap and water
t.
such as brushed
° Glass cleaner
2.
aluminum, or
• Plastic or non-
chrome
abrasive pad or
3.
• Oven door
sponge
• Trim parts
4.
Wash with soap and water or a glass cleaner and a soft cloth.
To prevent scratching or dulling of the finish, do not use mildly abrasive,
abrasive, or harsh cleaners, or caustic cleaners such as oven cleaners.
To clean brushed aluminum: Use only soap and water or a soft cloth and
glass cleaner to prevent scratching or dulling of the finish.
To clean brushed chrome door:
• Use a paste of baking soda and water and a soft cloth.
• Rub with the grain to prevent scratching, dulling or streaking of the
finish.
• Use a soft cloth and mineral oil to restore luster or to remove
fingerprints or smudges.
• Clean with an automotive chrome cleaner or polisher.
(Continued next page)
Advertisement
