Ceramic Glass; Oven Indicator Lights; Display; Start/Enter - Inglis IRE31301 Use & Care Manual

Electric range
Hide thumbs Also See for IRE31301:
Table of Contents

Advertisement

Available languages

Available languages

Use thefollowing c hart a saguide forcookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
Cast iron
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or
Follow manufacturer's
instructions.
Ceramic glass
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
Copper
Heats very quickly and evenly.
Earthenware
Follow manufacturer's
instructions.
Use on low heat settings.
Porcelain
See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless
steel
Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
ELEC ONIC OVENCONTROL
B
CDE
F
On
Delay
Door
Coat[Dis
Locked
Locked
K
J
/
H
SELF_CLEANIN
G OVEN
G
A. Oven display
F Off/cancel
B. Clock
G. Temperature/time
C. Timer/cancel
H. Cook time
D. Start/enter
I. Start time
(control lock)
J. Custom broil
E. Auto clean
K. Bake
The indicator lights are located along all 4 sides of the display.
The indicator lights light up or flash when the oven is in one of the
following modes: Bake, Broil, Clean (on some models), On,
Start?, Controls Locked, Door Locked (on some models), Delay,
Timer, Temp, Cook Time, or Start Time.
When power is first supplied to the appliance, "PF" or a flashing
time will appear on the display. Press OFF/CANCEL to clear.
If "PF" or a flashing time appears at any other time, a power
failure has occurred.
Press OFF/CANCEL and reset the clock if
needed.
When the oven is in use, the display shows preheat time or oven
temperature setting.
When the oven is not in use, the display shows the time of day.
When using Start Time/Cook Time, the display will show either
hours and minutes, or minutes and seconds.
If Start/Enter is not pressed after setting a function, the "Start?"
oven indicator light will begin flashing after 5 seconds.
The Start/Enter
pad begins any oven function. If the Start/Enter
pad is not pressed within 5 seconds after pressing a function
pad, the "Start?" indicator light will flash as a reminder.
If Start/Enter is not pressed within 1 minute after pressing a
function pad, the oven display will return to the time of day mode
and the programmed
function will be canceled.
The Off/Cancel pad stops any function except the Clock, Timer
and Control Lock.
The cooling fan may continue to operate after an oven function
has been canceled, depending on oven temperature.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK,
2. Press the TEMP/TIME "up" or "down" arrow pad to set the
time of day.
3. Press START/ENTER or CLOCK.
Tones are audible signals, indicating the following:
One tone
Valid pad press
Oven is preheated (long tone)
Function has been entered
Reminder, repeating each minute after the end-of-cycle
tones
Three tones
Invalid pad press
Four tones
End of cycle
,,
y, ,/,
,
The temperature
is preset at Fahrenheit, but can be changed to
Celsius on some models.
To Change:
Press and hold CUSTOM BROIL for 5 seconds. A
tone will sound, and "°C" will appear on the display. Repeat to
change back to Fahrenheit. To exit mode, press OFF/CANCEL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Irp33801Ire82301Ire32301Irp85801

Table of Contents