Assembly Handle Assembly; Brush/Nozzle Assembly - Hoover FloorMate SpinScrub FH40000 Owner's Manual

Assemble handle
Rotate bottom handle support (A)
up to the upright position until a
snap is felt.
Q lign control rod (B) on upper han-
dle (C) with slot in bottom handle
support (D).
O ush upper handle (C) all the way
down until you hear it snap in
place.
Install brushes and n°zz!e
To install brushes, place handle in
upright position. Tilt cleaner back so
that it rest!s on the floor.
Align post (A) on brush block with hole
(B) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole.
J
Continued -4
5