Pumpis replacedas an assembly which includesthe
quickconnectandtubing.(Fig. 18)
Fig. 18
The quick connect
is also available
as a separate
service
item.
L. Pump duct
The pump duct is held by the pump mounting
screw.
(Fig. 19)
Fig. 19
M. Motor cover assembly
DISTRIBUTOR
HOSE
Fig. 20
_
MOTOR
COVER
ASSEMBLY
®
1. Disconnect
hose to distributor.
2. Remove
five screws
(Fig. 21) and lift off.
On pump models,
if pump is removed,
screw
five will already be out.