Hoover F5835-900 Service Instructions Manual page 10

S. Reservoir assembly
1. Release two clips and remove from cradle
in lower handle. (Fig. 30)
The reservoir is replaced as an assembly which does
not include tubing.
\
The reservoir assembly can be inspected by removing
the diaphragm valve and checking the chamber and
valve. (Fig. 31)
Pull here
with
to remove
Fig. 31
Tubing routing is illustrated in Fig. 32.
Note: 900 coupler in pump tubing protects tubing
from kinking. Tubing is available in a service kit that
includes the tubing and 900 coupler. Pump tubing is
3/8' ID. All other is 1/4" 1 D.
Fig. 32
t
T. Motor
With motor cover removed disconnect leads and lift
motor out of main body.
The motor is replaced as an assembly only.