Hitachi 46UX24B Operating Manual page 40

USING THE GENIUS REMOTE TO LEARN ADDITIONAL
FUNCTIONS FOR CLU-850GR
READY LEARN
(Goes out) (Lights)
READY LEARN
(Flashing) (Flashing)
When storing has been performed correctly, the LEARN
indicator lights for about 2 seconds.
If the storingwas notdone correctly,or the codesare too
longto learn,or no more codescan be storedin memory
dueto memoryoverflow,theLEARNindicator andREADY
indicatorwillflash on and off.
)
Set the LEARN/USE mode selectswitchon the backof the Genius Remote to "USE" and checkthatthe buttonto
whichthe code is storedoperatescorrectly. If it does not operate correctly,repeat from step 1.
Repeat steps3 to 5 to store otherkeys.
) clear the stored codes from the USER mode.
et the MULTI-PAGE select switchto the USER mode and LEARN/USE mode select switchto "LEARN." Then, press
=_ POWER and the MUTE buttonssimultaneously for 3 seconds.The "READY" and =LEARN"LEDs willlighttogether.
I MULTI-PAGE KEYS with codes are reset to theirinitialstates.
) rememberstoredcodes,it isconvenientto paste the labels(user'slabel) providedon the buttons for the USER page.
thecorrectlabelsare not provided,it is possibleto write these letterson an emptylabel with a ballpointpen.
POWER READY LEARN
liE II_ II ° II " Ii
II' I1' IlK IlL U
mP.oL_,,=
CURSOR SO
"=O
USER'S LABEL
40