Unpacking Your Washer - Haier XQG65-11SU User Manual

XQG65-11SU -MANUAL 10/29/02 1:50 PM F/_'_ 24
iiiiiiiiiiiiiiiii _i; _i; _i;_i;_i; _i;_i;_i; _i; _i; _i;_i;_i; _i;_i;_i; _i; _i;_i;_ii_i _i_i_
Unpacking
Your
Appliance
• Remove all packing materials including transportation bolts and brackets. Also
remove adhesive tape holding the accessories inside and outside,
• Inspect and remove any remains of packing, tape or printed materials before
using the washer.
• Remove 2 bolts, 4 screws and 1 center bolt holding metal bracket from the back
of the unit that are installed to protect drum and internal components from dam-
age during shipping, (Wrench is included in the instruction manual bag)
• Screws and Bolts must be removed before using the machine. Once removed,
save them so when moving you can reinstall to protect the machine from damage
during shipping.
• Once you remove the bracket, reinstall bracket screws, center bolt and plastic
plug to prevent damage to the machine.
Bracket
Center bolt
plastic plug (not shown)
Screws
Bolt
(2)
- Bolt
22