Installation Instructions; Installing Your Combination Washer / Dryer; Tools Needed; Parts Supplied - Haier HLC1700AXW User Manual

INSTALLATION INSTRUCTIONS

INSTALLING YOUR COMBINATION WASHER / DRYER

We recommend that your new washer/dryer be installed by a qualified appliance
technician. If you feel that you have the skills to install the washer/dryer, please
read the installation instructions carefully before installing.
If, after completing these step, you are unsure that the washer/dryer is properly
installed, contact a qualified appliance technician.
Install the clothes dryer according to the manufacturer's instructions
and local codes to reduce the risk of fire.
To reduce the risk of severe injury or death, follow all installation instructions.
IMPORTANT: If your washer was just delivered and the outside temperature
was below freezing, do not operate until the washer warms up to room
temperature.

TOOLS NEEDED

You will need to have the following tools to help you in the installation of
your washer:
• Scissors
• Tape Measure
• Standard Screwdriver
• Gloves

PARTS SUPPLIED

Water Hoses (2)
(Flat washers are pre-
installed)
WARNING
WARNING
Fire Hazard
SAVE THESE INSTRUCTIONS
• Pliers
• Level
• Wrench
Drain Hose
(Support Bracket)
Wrench
(Used to tighten
locknuts and remove
transportation bolts)
7