XQG50-11 Manual
10/29/02
Unpacking Your Appliance
• Remove all packing materials including transportation bolts and brackets. Also
remove adhesive tape holding the accessories inside and outside.
• Inspect and remove any remains of packing, tape or printed materials before
using the washer.
• Remove 2 bolts, 4 screws and 1 center bolt holding metal bracket from the back
of the unit that are installed to protect drum and internal components from dam-
age during shipping. (Wrench is included in the instruction manual bag)
• Screws and Bolts must be removed before using the machine. Once removed,
save them so when moving you can reinstall to protect the machine from damage
during shipping.
• Once you remove the bracket, reinstall bracket screws, for center bolt and 2 side
bolts. Use supplied plastic plugs to prevent damage to the machine.
Bracket
Bolt
(use plastic plugs)
1:52 PM
Page 24
Center bolt
(use plastic plug) (not shown)
Screws(2)
English
Screws(2)
Bolt
(use plastic plugs)
22