Axis 5900 User Manual page 25

Edit WEP Parameters
Notes:
AXIS 5900 User's Manual
Click the Edit WEP Parameters button. You will be prompted for the root
password (default pass). Enter the WEP keys and click OK to save your
settings.
WLAN Parameters
Edit WEP Parameters
WEP Encryption Level
Active WEP key
WEP key x
Enforce WEP
Once you have clicked the OK button, the WEP parameter settings will be
saved and cannot be cancelled by clicking Cancel on the WLAN page.
When you have entered the WLAN settings to match your network, click
OK to save your settings.
Proceed to "Configuring your Print Server" on page 26 to set up your Axis
Network Print Server and the connected printers for printing.
Basic Installation (Wired & Wireless)
Description
Click the button to access the WEP parameter settings
WEP security. The default setting is that WEP encryption is disabled.
Select 64 Bit or 128 Bit security level. 128 Bit encryption level is the
highest level of security but may reduce the performance level.
Select the appropriate WEP key as specified by the network
administrator
Enter the WEP keys (as ASCII or as hexadecimal values) specified by the
network administrator
When enabled, the print server will not allow access to clients without a
WEP key
25