Axis 5900 User Manual page 148

The Parameter List
Enable SNMP Status
Example
148
Print Server LPR Queue Name
Three Port:
Parallel LPT1
Parallel LPT2
Serial COM1
SNMP Status is enabled through Windows' printer port settings.
You have a three port print server and want to enable SNMP Status for
LPT2. The table above tells you to set the SNMP Device Index to 3.
Using Windows XP as an example:
1. Go to Start | Printers and Faxes.
2. Select Printer and then Properties.
3. Select Port and mark the Port you would like to change.
4. Click Configure Port...
5. Ensure that SNMP Status Enabled is ticked and enter the correct index
number in SNMP Device Index, taken from the table above (3 in this
example).
6. Click OK and Close.
Raw Port Number SNMP Device Index
9100 1
9101 3
9102 2
AXIS 5900 User's Manual