Axis 5900 User Manual page 24

Basic Installation (Wired & Wireless)
WLAN Parameters
24
7. To access the WLAN settings page, click Admin | Network Settings |
Detailed View | TCP/IP Network | WLAN
Refer to the table below for a description of the WLAN parameter settings
used to configure the Axis Network Print Server for wireless printing.
WLAN Parameters
WLAN Node Address
WLAN Network Speed
WLAN Network Mode
WLAN SSID
WLAN Channel
WLAN Fragmentation Threshold These parameters are used to optimize the data transmission in
WLAN RTS Threshold
Description
The WLAN node address that is identical to the Axis Network Print
Server serial number which is found on the underside label on the print
server, e.g.
Ser.No: 00:40:8C:10:00:86
WLAN Node Address: 00 40 8C 10 00 86
Select the appropriate network speed according to your network
environment or select Auto Sense
Select Ad Hoc mode for peer to peer printing or Infrastructure mode for
wireless communication via an access point.
Note: The WLAN Network Mode must match the mode of the
workstation / laptop. This is set using the computer's wireless
configuration software.
The default SSID (service set identifier) in the Axis Network Print Server
is 'AXIS' followed by the last six digits of the serial number, e.g.
AXIS100086
Note: the SSID must match the SSID of the WLAN network interface.
This is set using the computer's wireless configuration software.
The default setting is channel 11 (Japan = channel 14) See "Technical
Specifications" on page 138 for more information
accordance with the IEEE 802.11b standard.
AXIS 5900 User's Manual