1.Handlebar
Folded Down
2.Nut
3.Brace
Figure 4
5.Check engine crankcase
oillevel. See
engine manual.
6.Connect
the battery ground cable ( -)to
the negative battery terminal.
7.Fill f uel tank. See
FILLING THE FUEL
TANKon
page 14.
NOTE: After the first twenty-five
hours of
operation, belt wear may require the pro
clutch cable and the drive control cables to be
adjusted. See Forward/Reverse
Drive
Controls on page 19 and Wheel Drive Belts
on page 20.
IMPORTANT:
Do not operate the unit without
understanding
how the controls work and
how to safely start, stop and operate the unit.
1. Battery Cover
2. Negative (-) Battery Cable
Figure 5
GB - 10