Table of Contents
Advertisement
Quick Links
Walk Behind Lawn Mower
Owner/Operator Manual
Transfer
Coller l'autocollant du
model &
modèle et du numéro de
serial number
série dans cet encadré.
label from
Transferir aquí la etiqueta
product
del modelo y número de
registration
serie del registro del
here.
producto.
911214 – Pro21XD CARB
ENGLISH
ESPAGNOL
Models
911207 – Pro21XD
00661700B 1/07
Printed in USA
Advertisement
Table of Contents
Related Manuals for Ariens 911207 - Pro21XD, 911214 - Pro21XD CARB
Summary of Contents for Ariens 911207 - Pro21XD, 911214 - Pro21XD CARB
- Page 1 Walk Behind Lawn Mower Owner/Operator Manual Transfer Coller l’autocollant du model & modèle et du numéro de serial number série dans cet encadré. label from Transferir aquí la etiqueta product del modelo y número de registration serie del registro del here.
-
Page 2: Table Of Contents
INTRODUCTION • Record Engine Model & Serial numbers here: PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting... -
Page 3: Safety
HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury. DISCLAIMER Ariens reserves the right to discontinue, make changes to, and add improvements upon its products at any time without public notice or obligation.The descriptions and specifications contained in this manual were in effect at printing. -
Page 4: Safety Decals And Locations
SAFETY DECALS AND LOCATIONS ALWAYS replace missing or damaged safety decals. Refer to Figure 2 for safety decal locations. Figure 2 1. DANGER! TO AVOID SERIOUS INJURY OR DEATH Read the operator’s manual. OL1801 Keep children and others away from unit while operating. OL4370 Never direct discharge toward other people. - Page 5 ALWAYS shut off engine, allow blade to stop and disconnect spark plug wire before clearing clogs or cleaning unit. Check grass bag for wear, damage, and/or deterioration. Replace only with Ariens original equipment replacement parts for safety. GB - 5...
- Page 6 A spark arrestor, if used, must be maintained in effective working order by the operator. See your Ariens Dealer or engine manufacturer’s service center. Emission Control System Certification Label...
- Page 7 DO NOT store unit inside a building with fuel in the fuel tank where any ignition sources are present. Use only accessories which have been approved by Ariens and are properly installed. Use only accessories or attachments that are designed for your unit and that can be used safely on your terrain.
-
Page 8: Assembly
CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding. CARTON CONTENTS 1. Mower Unit 2. Mulch Cover 3. Side Discharge Chute 4. Mulch Plug 5. Literature Pack 6. Grass Bag 7. Drive Cover and Mounting Hardware Figure 3 ASSEMBLY ASSEMBLY Figure 4... - Page 9 3. Install the drive cover with three hex bolts and lock washers. Make sure the plate does not pinch any cables. 1. Drive Cover 2. Mounting Hardware Figure 5 4. Connect the engine/blade control cable to the engine. Route the z-bend cable end into engine shutoff lever as shown below.
-
Page 10: Controls And Features
CONTROLS AND FEATURES 1. Handlebars 2. Speed Control Knob 3. Integrated Engine/Blade and Wheel Drive Control 4. Oil Fill/Dipstick 5. Fuel Tank and Cap 6. Air Filter 7. Primer Bulb 8. Lock Pin 9. Muffler and Muffler Guard 10. Mulch Cover 11. -
Page 11: Operation
CONTROLS AND FEATURES See Figure 7 for locations. WARNING: Improper operation can lead to injury. Learn what the controls do and how they work. Thoroughly read and understand entire Operator Manual. CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding. -
Page 12: Cutting Height Adjustment
CUTTING HEIGHT ADJUSTMENT DANGER: Avoid injury from rotating blade. ALWAYS shut off engine before adjusting cutting height. CAUTION: Both rear wheels must be set at same height or traction drive may not work properly. Cutting Height Settings Chart P1/H1 1-1/4 P2/H2 1-1/2 P3/H2... - Page 13 1. Lock Pin Figure 9 Rear Wheel To change cutting height, move cutting height levers one notch at a time on each wheel to set desired height. NOTE: Each wheel on mower must be set at the same height for a level cut. High (P6) 1.
-
Page 14: Filling The Fuel Tank
OPTIONAL CONTROLS Primer Bulb Push the primer bulb in to add fuel for easier engine start. Wheel Drive Control (self-propelled models) CAUTION: Unit will move forward at engine start if wheel drive control is engaged. ALWAYS release wheel drive control before starting unit. - Page 15 To Bag CAUTION: Check grass bag frequently for wear or deterioration. Replace worn or damaged bag with Ariens original equipment replacement bag only. 1. Shut off unit. 2. Install side discharge cover (Figure 14). 3. Lift rear door. 4. Hook grass bag frame on mounting flange.
-
Page 16: Emergency Stopping
EMERGENCY STOPPING To stop the mower in an emergency: 1. Release the engine/blade control. 2. Release the wheel drive control (self- propelled models). 3. Allow all moving parts to stop before leaving operator’s position. STARTING AND SHUT OFF WARNING: Improper operation can lead to injury. -
Page 17: Maintenance
CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding. Ariens Dealers will provide any service, parts or adjustments which may be required to keep your unit operating at peak efficiency. Should engine require service, contact an Ariens Dealer or an authorized engine manufacturer's service center. - Page 18 3. Remove bolt, lock washer, flat washer and blade from shaft. To install blade: 1. Replace blade, flat washer, lock washer and bolt on shaft. 2. Torque bolt to 37.5 - 50 lbf-ft (51-68 N•m) (bolt should fully compress lock washer). 3.
-
Page 19: General Lubrication
NOTE: The mower transmission is lubricated and sealed at the factory. It should need no routine lubrication. If the transmission leaks grease, bring the mower to your local Ariens dealer for repair. CHECK SPARK PLUG Spark plug should be replaced every 100 hours of operation or each year. -
Page 20: Service And Adjustments
SERVICE AND ADJUSTMENTS CAUTION: AVOID INJURY. Read and understand the entire Safety section before proceeding. SERVICE POSITION Put unit into service position for easy access to underneath the deck. CAUTION: Avoid fuel spills. Follow steps below to help prevent fuel spills. -
Page 21: Wheel Drive Control
If the engine/blade control does not stop the engine or blade within 3 seconds of releasing the control bail, Push belt take the unit to an authorized Ariens dealer through belt for repairs. channel and install it on the WHEEL DRIVE CONTROL engine pulley. -
Page 22: Storage
Brush off dirt and debris from all surfaces. Touch up all scratched surfaces to prevent rust. Matching touch-up paint is available from your Ariens Dealer. Do not use abrasives, solvents, or harsh cleaners. Cable Adjuster... -
Page 23: Troubleshooting
PROBLEM PROBABLE CAUSE Engine will not 1. Fuel tank empty or low. start 2. Fuel shutoff valve closed. 3. Spark plug wire loose or off. 4. Engine/Blade control cable detached, broken, or not adjusted properly. Engine is 1. Mower clogged with grass. difficult to restart Cut is poor... -
Page 24: Service Parts
SERVICE PARTS Always use genuine Ariens parts to keep your mower running like new. Description Part Number Air Filter 21541000 Spark Plug 21540800 Oil Filter 21540900 Blade 01137000 Drive Belt 07200114 ACCESSORIES See your authorized Ariens Dealer to add these optional accessories. -
Page 25: Specifications
Model Number Description Length - in. (cm) Height - in. (cm) Width - in. (cm) Actual Weight - lbs (kg) Cutting Width- in. (cm) Cutting Height - in. (cm) Engine, 4 cycle Model Engine Power - HP (kW) @ Max. RPM Max Rotation Speed of Cutting Edge - RPM (min Governed RPM (May be... - Page 26 (90) days after the date of purchase or 1000 hours of use, whichever comes first, if any product is rented or leased. Ariens Company • 655 W. Ryan St, P.O. Box 157 • Brillion, WI 54110-0157• (920) 756-2141 • www.ariens.com Ariens Limited...
-
Page 27: Warranty
(12) months after the date of purchase. Ariens may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating Ariens to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective. - Page 28 Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.ariens.com...