Select The Store Target Patch; Carry Out The Store/Swap Process - Zoom GFX-4 Operation Manual

2

Select the store target patch

Use the /
group, bank, and patch number that is to be used as a store
target.
It is also possible to use the BANK
bank.
4

Carry out the store/swap process

Press the STORE key once more.
The store/swap process is carried out and the unit reverts to the same
condition as before the store mode was activated. When wishing to cancel
the process, press the MANUAL/CANCEL key instead.
Operation Guide 3
/ / keys, and foot switches 1 - 3 to select the
Select whether to
3
store or swap the
patch
Use the
Each push of the
"STORE" and "SWAP" setting. Select the desired
action.
If the original patch was a preset patch,
the "SWAP" setting is not available.
Storing/Swapping Patches
foot switch to select the store target
key.
key toggles between the
ZOOM GFX-4
13