Type 9 - Zoom GFX-4 Operation Manual

TYPE 7
DELAY
This is a delay effect with a maximum delay time of 500 milliseconds.
TIME
Adjusts the delay time in 10-ms steps.
TYPE 8
PHASE
Simulates a phaser with silky smooth sound not attained by other models.
POSI
Selects the connection position of the
MODULATION module. The
following two settings are available.
bF: Before the DRIVE module
AF: After the EQUALIZER module

TYPE 9

RINGMD
This effect applies amplitude modulation to the input signal, resulting in a metallic sound character.
POSI
Selects the connection position of the
MODULATION module. The
following two settings are available.
bF: Before the DRIVE module
AF: After the EQUALIZER module
TYPE 10 PITCH
This effect varies the pitch in the range from 1 octave down to 2 octaves up.
PIT -12, -11... -1, 1, 2... 12, 24
Adjusts the pitch shift amount in
semitone steps.
TYPE 11 DETUNE
This effect mixes a slightly pitch-shifted component to the original sound, resulting in a chorus effect with only slight
modulation.
-10...-1, 1...10
DEPTH
Adjusts the effect sound detuning
extent.
TYPE 12 PDLWAH
Simulates a typical pedal wah with changing effect and feeling according to the pedal angle.
POSI
Selects the connection position of the
MODULATION module. The
following two settings are available.
bF: Before the DRIVE module
AF: After the EQUALIZER module
(Delay)
1 – 50
FB
Adjusts the feedback amount. Higher
values result in an increased number of
delayed sound components.
(Phaser)
bF, AF
RATE
Adjusts the modulation rate.
(Ring Modulation)
bF, AF
FREQ
Determines the frequency of the
modulation signal.
(Pitch Shifter)
TONE
Adjusts the effect sound character.
(Detune)
TONE
Adjusts the effect sound character.
(Pedal Wah)
bF, AF
FREQ
Adjusts the wah center frequency.
0 – 50
MIX
Adjusts the effect sound mixing ratio.
1 – 50
COLOR
Selects the character of the phase sound.
1 – 50
BAL
Adjusts the mixing balance between
effect sound and original sound. Higher
values result in stronger effect sound.
0 – 10 BAL
Adjusts the mixing balance between
effect sound and original sound. Higher
values result in stronger effect sound.
0 – 10
MIX
Adjusts the effect sound mixing ratio.
1 – 50
LEVEL
Adjusts the volume level.
ZOOM GFX-4
0 – 10
1 – 4
0 – 50
0 – 50
0 – 50
1 – 50
25