Turn On The Power; Select The Bank; Select The Patch - Zoom GFX-4 Operation Manual

Operation Guide 1
In the factory default condition, the memory of the GFX-4 contains 60 rewritable user patches and 60 read-only preset
patches. This section shows you how to select patches while playing your instrument. Try it out for yourself, to see what
the GFX-4 can do.
1

Turn on the power

Turn power on in the order GFX-4 ➝
amp/playback system.
The GFX-4 automatically goes into program
mode. In this mode, the display and the
GROUP/BANK indicator show the following
information.
Group
Patch name
2

Select the patch

To switch patches within the same
bank, simply press one of the foot
switches 1 - 3 whose LED is not
currently lit.
In program mode, foot
switches 1 - 3 serve for
patch switching.
The LED of the foot switch
corresponding to the
current patch is lit.
When the GFX-4 is in manual mode
(MANUAL key LED lit), foot switches 1 - 3
turn the various modules on and off.
8
ZOOM GFX-4
Selecting Patches for Playing
Bank
Lit when user
patchis selected
Lit when preset patch
is selected
Lit
3

Select the bank

To choose a patch from a
different bank, use the
BANK foot switch to
select the bank and then
use foot switches 1 - 3 to
select the patch.