Editing A Patch - Zoom GFX-1 Operation Manual

Editing a Patch

Editing means changing the various effect parameter settings of a patch.
Use an existing patch as a starting point and adjust the parameters to
create your own and original sound.
Select the effect parameter
Use the PLAY/EDIT selector to select the module and
parameter you want to edit.
The GFX-1 switches to the edit mode and the value of the currently
selected effect parameter appears on the display. When the GFX-1 is in
edit mode, a dot is shown in the bottom right corner of the display.
Parameter value
3 0
Lit
For information
on effect modules
and parameters,
see the section
"Effect
Parameters" at
the end of this
manual.
HINT
The DRIVE
module can also
be directly edited
by using the
DRIVE selector
and GAIN [+] / [-]
keys (→ p. 14).
16 ZOOM GFX-1
Terminate the edit mode
Set the PLAY/EDIT selector to "PLAY".
The unit reverts to the play mode.