Zoom GFX-1 Operation Manual page 17

Adjust the parameter setting
value
Use the VALUE [+] / [-] keys.
The keys operate as follows.
• Keeping one key depressed: Value changes continuously.
• Hold down one key while pressing the other key:
Value increases/ decreases rapidly.
• Pressing both keys simultaneously:
Switch to next effect type in same module.
NOTE
The editing changes made in this way are only temporary. When you
return to the play mode and select a different patch, the settings will
revert to the original condition. If you want to keep the change, store the
settings before switching the patch (→ p.18 ).
Changing the
module on/off
setting
Press one of the foot switchs
[1] – [4].
This switches the effect module
selected with the PLAY/EDIT selector
on or off.
NOTE
When the [PLAY/EDIT] selector is set to
"PATCH LEVEL" the module cannot be
turned off.
Editing a Patch
ZOOM GFX-1 17