Lcd Display Error Messages - Xerox WorkCentre 490cx User Manual

LCD Display Error Messages

LCD Display
CHECK CARTRIDGE
INK LOW
DUPLICATED
RETRY REDIAL?
DOCUMENT JAM
COVER OPEN
CLOSE COVER
GROUP NOT AVAIL-
ABLE
7-10 Troubleshooting
Table 1:
Meaning
The print cartridge is not
correctly installed in the
machine.
The print cartridge is
low on ink.
The number entered is
already stored in another
one-touch or speed dial
location.
The machine is waiting
for the programmed
interval to automati-
cally redial a previously
busy station.
The document jammed
in the paper feeder.
The cover is not
securely latched.
You have tried to select
a group location where
only a single location
number can be used.
Solution
Following the proce-
dure in Installing Ink
Cartridges on page 1-
13, remove and re-
install the print car-
tridge.
Install a new print car-
tridge.
Check the number and
enter under one location.
You can press the
button
Start to
immediately redial, or
the Clear/Stop
button
to cancel the
redial operation.
Refer to Clearing Jams
on page 7-2 to remove
any jammed paper.
Press down on the cover
until it snaps in place.
Group Location Feature
is not available.