Setting The System Id (Your Number And Name) - Xerox WorkCentre 490cx User Manual

4
Press the Start
correct.
The display indicates the date and time you have set, then returns to
Standby mode.
Note: If an invalid number is entered, the machine beeps and does not
proceed to the next step. If this happens, enter the correct number.

Setting the System ID (Your Number and Name)

In some countries you are required by law to indicate your fax number on
any fax you send. The System ID, containing your telephone number and
name, will be printed at the top of each page sent from your machine.
1
Press the Menu
Then press the Start
LCD display. A flashing cursor in the display prompts you to enter the
telephone number.
Note: If there is a number previously registered, it appears in the display.
1-54 Getting Started
button when the date and time settings displayed are
button, then press the 0 + 2 buttons on the keypad.
button. SYSTEM NUMBER appears in the