Playback; Playback Without Search Function - EverFocus PowerPlex EDR-920 Installation & Operation Manual

5. PLAYBACK

5.1 PLAYBACK WITHOUT SEARCH FUNCTION

(1) Playback
PLAY
(2) STOP
STOP
(3) Fast forward / reverse
PLAY
ATTENTION: HDD shutdown and removal is not admissable during recording and playback mode
and upon DVR system startup!
ATTENTION: Switching off the harddisk with the key switch will logoff the harddisk from the system.
Remove the harddisk only after the green power source LED at the harddisk tray is extinguished.
Press the PLAY key to switch the DVR to playback mode. Depending on
the "QuickPlay" function settings (see SYSTEM menu), playback starts at
one of the following positions:
QuickPlay OFF: playback starts at the last playback position
QuickPlay ON: playback starts 5 ~ 60 min (definition in SYSTEM menu)
before current recording position
Press the STOP key to stop the playback mode.
Use the JOG/SHUTTLE to control the playback speed in playback mode.
Turn the SHUTTLE clockwise for fast forward playback. Depending on the
shuttle speed, the playback speed increases to 2, 4, 6, 8, 16 or 32x.
Turn the SHUTTLE counter-clockwise for normal or fast reverse playback.
Depending on the shuttle speed, the playback speed increases to 2, 4, 6, 8,
16 or 32x.
Use the ENTER key to lock the fast playback search and the SHUTTLE or
PLAY key to unlock the fast playback search.
58