Network - EverFocus PowerPlex EDR-920 Installation & Operation Manual

3.7 NETWORK MENU
Define all network-related settings in this menu.
These settings should only be carried out by skilled personnel qualified for network installation; if
the DVR is implemented in existing networks, the network administrator should be consulted.
This chapter doesn't go into basic network technique details. For further information, especially
about router installation and internet connection, please refer to the publication "EverFocus
network technique".

3.7.1 NETWORK

NETWORK SETUP MENU
CONFIG
ALARM
EMAIL
PASSWORD
Define the basic DVR TCP/IP settings in the NETWORK menu:
(1) DHCP: DHCP ( Dynamic Host Communication Protocol), automatic IP number
assignment (if supported by the network).
YES: DHCP activated
NO: DHCP deactivated.
(2) IP ADDRESS: Enter the DVR's IP address.
If DHCP is activated, IP address is assigned automatically.
(3) SUBNET MASK: Local network subnet mask:
If DHCP is activated, subnet mask is assigned automatically.
(4) GATEWAY: Network gateway IP address for external access.
If DHCP is activated, gateway address is assigned automatically.
(5) DNS SERVER: Local network DNS server IP address.
If DHCP is activated, DNS server address is assigned automatically.
DHCP NO
IP ADDRESS 192.168.001.200
SUBNET MASK 255.255.255.0
GATEWAY 192.168.001.100
DNS SERVER 192.168.001.110
HTTP PORT 00080
CONTROL PORT 01600
DATA PORT 37260
MAC ADDR 00:11:14:01:83:2A
42