Table of Contents
Advertisement
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
L The unit will beep once, the CHARGE
indicator will light, and "Charging" will
be displayed.
L "Charge completed" is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Base unit
CHARGE indicator
Charger unit (KX-TG2422 only)
CHARGE
indicator
Note:
L To ensure the battery charges properly,
clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean more
often if the unit is subject to grease, dust,
or high humidity.
For assistance, please call 1-800-211-PANA (7262).
Battery strength
You can confirm the battery strength on the
handset display.
Battery icon
5
6
7
8
Recharging the battery
Recharge the battery when:
– "Recharge battery" is displayed or
7 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
L Recharge the handset battery for more
than 15 minutes, or the display will
continue showing the indication.
L If the battery has been discharged, the
handset will display "Charge for 6h"
and 8 when you place the handset
on the base unit or charger.
Preparation
Battery strength
Fully charged
Medium
Low
When flashing: needs
to be recharged.
Discharged
11
Advertisement
Table of Contents
