Fcc And Other Information - Panasonic BB-HGW700A Installation & Troubleshooting Manual

Installation/Troubleshooting
1.1.1

FCC and Other Information

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This product operates at frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of this product should not be placed near or on top of
a TV or VCR. If interference is experienced, move this product further away from the TV or VCR. This
will often reduce or eliminate interference. Operating near 2.4 GHz electrical appliances may cause
interference. Move away from the electrical appliances.
Environment — do not place the product in a room where the temperature is less than 0 °C
•
(+32 °F) or greater than +40 °C (104 °F). Allow 10 cm (4 inches) clearance around the product for
proper ventilation.
Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
• Routine care — wipe the product with a soft cloth. Do not use benzine, thinner, or any abrasive
powder. When you leave the product unused for a long period of time, unplug the AC cord plug from
the outlet.
• If there is any trouble — consult an authorized Panasonic Factory Service Center.
FCC RF Exposure Warning:
• To comply with FCC RF exposure requirements in uncontrolled environment:
• This equipment must be installed and operated in accordance with provided instructions and a
minimum 20 cm (8 inches) spacing must be provided between antenna and all person's body
(excluding extremities of hands, wrist and feet) during wireless modes of operation.
• This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
• Medical
Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if
they are adequately shielded from external RF (radio frequency) energy. (The product operates in
the frequency range of 2400 MHz to 2483.5 MHz, and the power output level is 0.1 watts.) Do not
use the product in health care facilities if any regulations posted in the area instruct you not to do
so. Hospitals or health care facilities may be using equipment that could be sensitive to external
RF (radio frequency) energy.
• Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this device.
4