Panasonic BB-HGW700A Installation & Troubleshooting Manual page 24

Installation/Troubleshooting
4.
Check the connection.
1) To display the top page of this product start
up the web browser, enter "http://
bbhgw.webpage:8080" into the address
bar, and press [Enter].
• In standard settings, if you enter "http:/
/192.168.0.254:8080" into the web
browser's address bar, the top page will
be displayed.
2) Check that the camera indicator is shining
green and click [Camera Portal].
3) Click a camera frame on the camera portal
page, access the camera, and check that it
is connected.
• If a single camera page is displayed,
setup is completed.
• If an exclamation mark is displayed,
click it and the camera's password
window is displayed. Perform the
settings on each page. Setting Allow
Access from the Internet to Enable,
displays the camera images on the
Camera Portal over the Internet. Setting
Disable only displays the camera
images on the Camera Portal when
accessing from the LAN side.
(It is displayed when a factory default
camera is connected.)
• If a key mark is displayed, click it and
enter that camera's user name and
password.
(If camera authentication has been set
up, the key mark will be displayed.)
24
1) Enter "http://bbhgw.webpage:8080".
2) Click here.
3) Click here.