Panasonic BB-HGW700A Installation & Troubleshooting Manual page 20

Network camera management system

Hide thumbs Also See for BB-HGW700A:

Table of Contents

Installation/Troubleshooting

When setup is complete, click [Save and Go to

Connection Mode].

•

The connection mode page is displayed.

Select the ISP entered in step 4.

When setup is complete, click [Save].

•

The entered information is saved.

Note

When saving, do not cut the power supply. If cut, saving might not be completed successfully.

When [Restart] is displayed on the setup page,

click it.

10.

Restart the PC.

•

Check that the PC is connected to the

Internet.

Notes

•

When registering or editing, restart all PCs connected to the LAN (home) side.

•

When adding more PCs after setup has been completed, connect the new PCs to jacks

LAN1 to LAN4 and then restart.

Table of Contents