Wireless Antenna; Lcd Lid Hook - Packard Bell EasyNote B3 Disassembly Manual

3. Gently lift out the LCD panel.
4. Remove the remaining 2 screws on each side of the LCD panel to remove the
brackets.

Wireless Antenna

To remove the wireless antenna, perform the following steps:
1. After removing the LCD panel, remove the tape holding the antenna.
2. Remove the screw (see
Picture 18. Wireless Antenna Screw

LCD Lid Hook

To remove the LCD lid hook, perform the following steps:
1. After removing the LCD panel, you can take out the hook.
Picture 18).
13